Clean SCARA robots YK-XGC/XC Type

Introduces the clean SCARA robots.

YK-XGC/XC Type Clean SCARA robots

A clean room applicable model of the SCARA robot.
The Z-axis spline is covered by bellows made of less dust emission materials and other sliding parts are completely sealed.
Harnesses are also completely built-in and the inside of the robot is sucked from the rear of the base to prevent dust emission.

Degree of cleanliness : Class 10 (0.1μm) equivalent to FED-STD-209D
(CLASS ISO3 ISO14644-1)
*Per 1cf (0.1µm base),when suction blower is used.

Arm lenght: 180 mm do 1000 mm

Intake air: 30 do 60 Nℓ/ min.

Degree of cleanliness: CLASS ISO3(ISO14644-1)
CLASS10(FED-STD-209D)

Maximum payload: 20 kg

YK-XGC/XC Type Clean SCARA robots

A clean room applicable model of the SCARA robot.
The Z-axis spline is covered by bellows made of less dust emission materials and other sliding parts are completely sealed.
Harnesses are also completely built-in and the inside of the robot is sucked from the rear of the base to prevent dust emission.

Degree of cleanliness : Class 10 (0.1μm) equivalent to FED-STD-209D
(CLASS ISO3 ISO14644-1)
*Per 1cf (0.1µm base),when suction blower is used.

Arm lenght: 180 mm do 1000 mm

Intake air: 30 do 60 Nℓ/ min.

Degree of cleanliness: CLASS ISO3(ISO14644-1)
CLASS10(FED-STD-209D)

Maximum payload: 20 kg

Technical documentation

Funkcje       Specyfikacja

Al. Kazimierza Wielkiego 6e, 87-800 Włocławek, Poland
Tel. +48 601 592 55554 231 10 05, Fax: +48 54 411 25 56 

Al. Kazimierza Wielkiego 6e,
87-800 Włocławek, Poland
Tel. +48 601 592 55554 231 10 05
Fax: +48 54 411 25 56 

Renex Robotics » Clean scara